Ducati

2007 Hypermotard 1100


$11,995.00

2007 Hypermotard 1100

View Larger Image

Alternate Views
1 · 2 · 3 · 4 · 5


Description:

Riding the Hypermotard lets you rule the road. Wide, tapered section handlebars transfer control of the tarmac to the rider and a full length seat eases fore and aft movement—up front when entering the turns, then slide back for maximum traction on exit.

A rigidly triangulated Trellis frame and track-tested chassis geometry is matched with state-of-the-art suspension. Start off with the road-holding prowess of huge 50mm Marzocchi forks, gripped by a triple screw lower fork crown. These cartridge damper forks work as impressively as they look, with special high rigidity stainless steel sliders and external adjustability for compression and rebound damping, plus spring pre-load. The rear suspension performs with equal precision by using a fully adjustable ZF Sachs shock mounted to a robust single-sided swingarm.

Light Marchesini wheels mounted on large diameter axles are fitted with the latest Z-rated Bridgestone BT014 tyres sporting a fat 180/55 section on the rear. Stopping power is controlled by twin radially mounted Brembo four piston calipers gripping new lightweight 305mm twin discs up front, and a 245mm disc at the rear to make stopping as thrilling as gassing it.

The new 1100 Desmo engine pumps out potent torque and horsepower. Twist the throttle and no matter the rpm, fuel injected power is at the rider’s command. The lightweight, 90 degree Twin stands at the pinnacle of more than three decades of Desmo air-cooled development. One ride makes it clear why the 1100 engine has charmed journalists worldwide. This is the perfect motorcycle engine.

  • Year: 2007
  • Make: Ducati
  • Model: Hyper
  • Condition: New
  • Frame: Tubular steel Trellis frame
  • Wheelbase: 56.9in
  • Front Wheel: 5-spoke in light alloy 3.50 x 17
  • Rear Wheel: 5-spoke light alloy 5.50 x 17
  • Front Suspension: Marzocchi 50mm fully adjustable upside-down fork
  • Rear Suspension: Progressive linkage with fully adjustable Sachs monoshock. Aluminium single-sided swingarm.
  • Front Brake: 2 x 305mm semi-floating discs, radially mounted Brembo calipers 4-piston, 2-pad
  • Rear Brake: 245mm disc, 2-piston caliper
  • Weight: 394lbs
  • Seat Height: 33.3in
  • Engine Type: L-Twin cylinder, 2 valve per cylinder Desmodromic, air cooled
  • Cooling System: Air Cooled
  • Power: 95hp - 70kw @ 7750rpm
  • Torque: 76 lb-ft - 10.5kgm @ 4750rpm
  • Gearbox: 6 speed
  • Exhaust: Lightweight 2-1-2 system with catalytic converter and lambda probe
  • Clutch: Dry multiplate with hydraulic control
  • Primary Drive: Straight cut gears, Ratio 1.84:1
  • Final Drive: Chain, Front sprocket 15, Rear sprocket 42
  • Warranty: 2 Years Unlimited Mileage

Check out our online shop!